A box blade, also known as a box scraper, is one of the ultimate and most useful landscaping tools. Carefully used, box scrapers can create perfectly graded golf greens, dirt racing tracks, fields and trails, but let us first examine how to level your own back yard using a box blade.
Box blades may be used for the removal of roots and trash, removing topsoil to establish driveways, cutting or building grades and leveling building sites. Preparing grades for drainage, scarifying, or backfilling holes or trenches are other possible applications, but the primary use of a box blade is the spreading of topsoil and gravel, and surface grading in preparation for lawn and turf, be it sod or seed.
To level your yard using a box blade, you require an appropriately sized box blade and tractor. Do obtain a unit that is reasonable for the size of your project. Using a 42" lawn-tractor size box blade, it would take weeks to landscape a 20 acre estate-sized project, and if your yard is a small city lot, a huge unit is difficult or impossible to operate properly for lack of room to maneuver. Do apply common sense in the selection of both box blade and tractor.
Box scrapers commonly range from a small 42" unit that might be pulled by a small garden tractor or quad, to much larger 6' and 8' landscaper models that require more powerful wheeled tractors to pull them. Box scrapers are usually equipped with removable scarifier "shanks" that are adjustable in height. The shanks serve to rip and loosen the soil to allow the cutting blade to move and level it as the unit is dragged forward. The number of shanks on any box blade is limited by the horsepower available to pull the unit. It is important to recognize that the horsepower requirement changes substantially with additional shanks, depending upon soil conditions. Your 16 hp 2WD lawn tractor will not pull or operate a 6 foot box scraper with 6 shanks fully extended or not.
A 42" unit pulled by a 16hp garden tractor or quad may have 3 shanks, while a 6' unit could have 6 or more shanks and require a tractor of 40 hp or bigger to operate it satisfactorily. Depending upon the manufacturer's design and the size of the unit, the shanks may be raised and lowered hydraulically, mechanically, or simply by manual adjustment. Smaller box blades designed for use with a small lawn tractor may have wheels that are adjustable in height to control the depth of cut and thickness of soil spread.
Moderately easy to master, box scrapers used by homeowners are most commonly used for leveling soil to create a smooth, attractive graded surface for lawn seeding, landscaping, or surface preparation for sod. As with any do-it-yourself project, the end result depends a great deal upon the skill of the operator.
This is how to level your yard using a box scraper.
1. Install the box scraper on the hitch of the tractor. With smaller, wheeled units, there is only a single hitch. Adjust the wheels as required.
2. Larger units are attached by a three-point hydraulic hitch; two lower arms are attached, and the adjustable upper link should be set so the unit sits level. Attach the unit first and then adjust the upper link. Do NOT lower the teeth or shanks until you are on the actual job site.
3. Check to see if the hydraulic lift is working correctly. Observe all safety precautions when operating tractors and power equipment. Drop the implement slowly to prevent damaging it.
4. Examine the job site and remove any large logs, sticks, rocks and other impediments to the landscaping project. Place stakes and a safety ribbon around the root area* of any heritage trees that you may wish to protect; a box blade can easily rip out tree roots!
(* Keep in mind, as a rough guide, the root system of most trees is approximately the same size in diameter as the crown, or branch structure of the tree.)
5. Move any observers to a safe location !
6. Move the equipment onto the site, and using the back of the blade as a bulldozer, carefully push down any large piles of imported dirt or gravel if required . Do NOT drive on top of a huge pile of soil, but instead, work safely starting from grade level. Start on one side, moving the material towards the area requiring filling.
7. Lower the box blade shanks minimally, either hydraulically or otherwise, and drag the area. The idea is to rough-grade the area so you can evaluate the overall existing grade and plan where soil must be moved most efficiently. Thinking twice and moving the soil only once is a worthy goal for efficient use of your time, especially if you are renting equipment. Taking time to evaluate the rough grade properly first can save time, work and money.
8. Lift the box with the hydraulic lift and commence constructing an even grade, first dragging soil or gravel into the lower areas. Keep your drainage plan in mind as you work Use the hydraulic lift control to maintain a constant grade as much as possible.
9. For sharply higher areas, lower the shanks substantially and cut the same path several times until the required grade is achieved. Use that grade as a bench mark and begin cutting adjacent areas to that same lowered grade.
Do repeat passes, and when the overall grade is close to the benchmark elevation, work at right angles on subsequent passes. Do not be concerned with minor defects at this point.
10. After all major grade corrections are made, raise the shanks and grade the whole area again, dragging the area with the shanks totally retracted or only minimally exposed. Check the grade and slope for conformity to the drainage pattern desired. Remember that all drainage should be sloped away from buildings, walkways and driveways
11. For the final grading, raise or retract the shanks completely and drag the grade to a smooth condition.
Congratulations! You now know how to use a box scraper to level your yard. You finished just in time, here comes the truckload of sod !